Water soluble lubricants

For cutting or non-cutting metalworking

Raziol concentrates for water-miscible lubricants are tested and proven, secondary amine-free, water-miscible products for cutting or non-cutting metalworking. The lubricant concentrates are comprised of chemical constituents selected in accordance with the latest requirements for health and safety at work and environmental protection

Storage: All Raziol cooling lubricants must not be fouled during transport and storage with dirt, water and other substances. When stored, intense heating (e.g. owing to sunlight) or the action of frost should be avoided. Therefore, the storage temperature must be between 5 – 40 °C (frostfree).

Preparation: Preparation: The water for mixing has to be of drinking water quality and, if possible, of medium hardness. You can obtain more information on the water quality from your local water supplier. Avoid excessively low water temperatures. The given concentrations should not be excessively overshot or undershot, since otherwise, there is a danger of corrosion or foam formation. Slowly add the concentrate to the mix of water prepared.The concentrate is added slowly to the prepared mixing water. The product may then only be applied following a prescribed period which allows thorough mixing of the constituents. Utilisation of an automatic dosing system is recommended.